12V 6A Lead-Acid Battery Charger Intelligent Pulse Repair For Electric Vehicle Car Motorcycle Battery
$19.99
- Product Code: ED0018788
- Availability: In Stock
- Ex Tax: $19.99
Description：
1.Lead-acid battery charger, all-round protection of the battery, intelligent fast charging, refusal of overcharge, short circuit, leakage, noise and virtual power.
2. Connect the mains plug to the 220V mains socket, the charger enters the standby state, and the LCD displays 14.6V
3. Connect the positive and negative electrodes of the battery to both ends of the charging output power cable. The red light indicates charging.
4. The full indicator light is always on, indicating that the battery is fully charged and the charging is complete.
Feature:
1. Three-stage pulse charging, the charging speed is faster
2. Four protection functions:
-Reverse connection protection: It can avoid the charger fault caused by the reverse connection of the positive and negative poles and effectively protect the charger.
-Full self-stop: built-in microcontroller MCU intelligent control and management
-Shock protection: It can reduce the starting current, suppress the rapid change of the current flowing in the line, prevent strong electric shock, and protect the rechargeable battery and battery.
-Prevent water loss and limit current: prevent the battery from vulcanization and prevent the battery from being fully charged to continue charging
3. Built-in cooling fan: When the charger starts, the fan automatically rotates to reduce the internal temperature of the machine and increase the service life.
4. Intelligent display panel: automatic carousel temperature, current, voltage and power
5. Wide range of applications: suitable for a variety of motorcycles, car models and 12V lead-acid batteries/gel batteries.
Specification :
Product model |
SON-1206Y |
Battery type |
Lead-acid battery |
Maximum charging current |
6A |
Applicable battery voltage (DC) |
12V |
Rated input voltage (AC) |
90V~250V |
Rated frequency |
47Hz~63Hz |
Full load frequency |
≥87% |
Mechanical shock and earthquake resistance level |
In line with SAEJ1378 |
Temperature range |
-20℃~+90℃ |
Product size |
168*78*62mm |
Product weight |
0.32kg |
Plug cable length |
1085mm |
Clip line length |
660mm |
Fitment：
This product is suitable for charging 12V lead-acid batteries/gel batteries and a variety of motorcycles and car models.
Charging Step:
①Check whether the rated voltage of the battery to be charged and the output voltage of the charger are consistent.
② Connect the charger and the battery to be charged as required.
③ Check whether the mains voltage matches the rated input voltage of the charger.
④ Connect to the power supply and observe whether the indicator light is on.
⑤If the charging indicator does not light, please disconnect the mains quickly, and check the mains, battery and all connections.
⑥When the battery is fully charged, please disconnect the commercial power first, and then disconnect the battery cable.
Safety Precaution:
1. This charger product is specially designed for charging 12V lead-acid batteries/gel batteries, and cannot be used as a power source for other electronic equipment.
2. There is high voltage and danger in the charger. It is strictly forbidden to open the charger by yourself.
3. Since heat consumption is unavoidable during charging, the charger and battery should be used in an indoor environment with good ventilation and heat dissipation. It is strictly forbidden to use in a humid, high temperature, flammable, explosive gas environment.
Note：
When the charger with reverse connection protection function is not connected to the battery, there is no output voltage at the output terminal, and the output is only triggered when the output terminal is connected to the battery after being triggered.
Product Included:
1 X |
Battery Charger |
1 X |
Use Manual |
