2 IN 1 Super OBD2 Chip Tuning Box With Reset Button for Diesel Car
$7.68
- Product Code: ED0006563
- Availability: In Stock
- Ex Tax: $7.68
2 IN 1 Super OBD2 Chip Tuning Box With Reset Button for Diesel Car
Description:
1.SuperOBD2 is equipped with the engine protection function and 100% safe for your car engine.
2.SuperOBD2 produced on the printed circuit board in SMD technology with high quality.
3.2 IN 1 SuperOBD2 Chip Tuning Box With Reset Button
4.Plug and Drive OBD2 Chip Tuning Box
5.Immediately Installation Effective Immediately
Feature:
1.SuperOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine and reducing fuel consumption for the economy and lower emission for the world.
2.SuperOBD2 is easy to install. Just plug it into the OBD2 connector of cars.,which made from the year of 1996 all over the world.
3.It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, SuperOBD2 adjusts itself to the car, due to driving habits make new map in the car's computer ECU to increase the performance of engine and adjusts itself to match your car perfectly for more fuel saving and immission at the same of time.
4.When it plugged into OBD2 connector, it receives the information from the car computer ECU. With the received data from ECU, it adjusts the boost pressure, quantity of fuel, injection timing pressure to increase the performance and to decrease the fuel consumption of your car.
5.2 IN 1 SuperOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.it can finds out the hidden power of your car. It does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
6.It does not change any of the settings permanently. To turn back to the car's original settings, just unplug it from OBD2 connector.
7.SuperOBD2 finds out the hidden power of your car.
8.Up to 20% more power
9.Up to 15% fuel savings
10.NitroOBD2 is very easy to use.
Specification:
SuperOBD2 Diesel |
Red |
SuperOBD2 |
More Simple & More Usefull |
Certificates |
CE |
Installation and Calibration:
1.Pull the Car Key out from the ignition.
2.Find OBD2 connector in your car and Plug in SuperOBD2
3.Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4.Press the reset button,just wait for a while about 3-5 sec. (SuperOBD2 will communicate and establish connection with ECU)
5.Start up the engine.
6.SuperOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus SuperOBD2 will adjust itself to match your car perfectly .
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.
OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
OBD2 necessarily for cars:
Sold after January 1, 1996 in the USA
Sold after January 1, 2001 in the European Union
With diesel engine sold after January 1, 2003
Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering
column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
Package Included:
1 X |
2 In 1 Super OBD2 Chip Tuning Box Interface (about 20g) |
1 X |
User Manuel English |
,
,
,
