Feature:
1. Self-stop at full power
2. Upgrade 4 Mode
3.Digital display power
4. Sound prompt
5. Automatic identificaion of 6V, 12V
6. Multifunctional protection
7. Apply for Scooter, motorcycle, car, small truck, tractor and any vehicle batteries.
Specification:
Optional Plug |
US/EU/UK/AU Plug |
Input voltage |
110-240V |
Power |
260W |
Output voltage |
12V, 6V |
Frequency |
50-60HZ |
Working Current |
10A |
Product Size |
Approx.180x145x70mm |
Full conversion rate |
93%+3% |
Working temperature range |
-30CTO+35"C |
Working modes |
1.Constant current mode 2.Short circuit protection 3.Reverse connection protection 4.Lowvoltage protection |
Warning:
①Dangerous high voltage is contained inside the charger, so please contact your local dealeror the manufacturer in case of equipment failure.
②Do not use under humidity or high temperature, or where there are flammables or explosives.
③Do not block cooling hole, or use the charger while cooling fan is stopped.
④Do prevent rain or water entry into the machine to avoid damages.
⑤Non-professional technicians are strictly prohibited to open the machine or change its purpose. Otherwise, severe injury may be caused.
Charging Operation:
Step 1, Examine and make sure reted voltage of battery is conforming to output voltage of charger.
Step 2, Connect correctly the charger and the battery.
Step 3, Examine and make sure mains supply voltage is conforming to input voltage of the charger.
Step 4, Connect mains supply and the battery, watch to see if the indicator is on and the cooling fan is working when charging.
Step 5, if the charger refuse to work, turn off mains supply immediately and check all the connecting cables between mains supply, the battery and the charger.
Package Included:
1 X |
Battery Charger |