Description:
1. Heating circuit can be designed, the heating body is fire-resistant,
washable 200 times the same resistivity.
washable 200 times the same resistivity.
2. excellent flexibility, high heat utilization.
3. Heating element is completely sealed in the high insulation layer,
the insulation layer 4KV / 5S does not breakdown.
the insulation layer 4KV / 5S does not breakdown.
4. With excellent chemical resistance, anti-bacterial properties and anti-radiation properties,
temperature control devices can be used to precisely control the working temperature of the heating film.
temperature control devices can be used to precisely control the working temperature of the heating film.
5. Washable. The highest temperature up to 65 ℃.
6. A charge can be heated 4-12 hours, according to the battery capacity;
conventional use is 7.4V-4400mah battery, full charge can be a fever 4-12 hours
(heating temperature changes according to the gear changes) fever in the 35- Adjustable between 65 degrees.
conventional use is 7.4V-4400mah battery, full charge can be a fever 4-12 hours
(heating temperature changes according to the gear changes) fever in the 35- Adjustable between 65 degrees.
7. Electric heating film for the 5VUSB or DC7.4V low-voltage design,
will not produce harmful electromagnetic waves, (electromagnetic wave is 0).
will not produce harmful electromagnetic waves, (electromagnetic wave is 0).
Specification:
Name: Warmer Heated Pads
Pad Size: 11x7cm
Room temperature resistance: 6-8 (Ω)
Maximum Voltage: 5 (V)
Thickness: 0.8 (mm)
Heater Control:
1.Power on: connect the heating element connector to the battery,
red and blue flashing self-test, long press the silicone button for 2 seconds to boot.
red and blue flashing self-test, long press the silicone button for 2 seconds to boot.
2.Shut down: long press the silicone button off for 2 seconds.
3.After boot is preheated - flashing red light, the maximum output power,
can quickly raise the temperature up. (5 minutes after the white light automatically)
can quickly raise the temperature up. (5 minutes after the white light automatically)
4.Click again in the temperature - white light long bright.
5.Click again for low temperature - blue light long bright.
6.Click again for the high temperature ---- long red light, then press red white blue switch.
Note:
Heating cloth use matters needing attention:
1: Do not let yourself, babies or people who are not sensitive enough to heat.
2: No needling knife heating cloth, when no one indoors strictly energized use.
3: Do not use in wet conditions, please dry before use.
Package Included:
5 X Warmer Heated Pads