12~24V led digital battery mate is a simple but efficacious battery testing tool which can determinethe battery state, it’s easy to use and be understood.
Main Functions:
1.Checking charge level
2.Functional test of dymano
3.Checking battery starting capability
4.Battery overload display
Connections:
Attach the cable clip of the red cable to the plus point(+ of the battery and the cable clip of the black cable to the minus point(-)of the battery.
DifferentLed display to showBattery Sate
Display 1: All Led lights off, Testing results: none Charging Voltage,Dead Battery
Display 2:”ON”led twinkling, other Led off; Testing results:4.6-11.2V Charging Voltage,Engine being hardly turned on, turn off all electrical equipment and charge battery immediately.
Display 3:”ON”Led ON,”LOW”Led twinkling; Testing results:11.2-11.6V Charging Voltage,Low charged Battery, being charged immediately.
Display 4:”Low”led on, ”Middle”led twinkling; Testing results:11.6-12.2V Charging Voltage, Middle charged Battery, better being charged sooner.
Display 5: “Middle”Led on; Testing results:12.2V Charging Voltage, Middle charged Battery, better being charged.
Display 6: “Middle”Led on, ”Full”Led twinkling; Testing results:12.2-13.1V Charging Voltage, Middle charged Battery, better being charged.
Display 7:“Full”Led on, ”Good”Led twinkling; Testing results: 13.1-14V Charging Voltage, Good battery,Full Charged
Display 8:”Good”Led on; Testing results: 14V Charging Voltage, Good battery,Full Charged.
Display 9:”Good”Led on, “Fault”Led twinkling; Testing results: 14-16V Charging Voltage, Battery may be damaged,Check the engine and tester.
Display 10:“Fault”Led on; Testing results: Above 16V Charging Voltage, fault Battery.
Feature:
6-LED display, clearly present the alternator and battery state.
Two testing clips for safe and easy operation.
Small size and light weight, convenient to carry.
Fit for all 12 V car, motorcyclebatteryetc.
With a good chip inside, not easy to get hot on the surface.
6 Led Lights:
Alternator state
First light (Red): Fault
Second light (Gree): Good
Battery State
First light (Green): Full
Second light (Yellow): Middle
Third light (Red): Low
Check Before charge
First light (green): OK
Specifications:
LED quantity: 6 (2 red, 3 green, 1 yellow)
Material of wire: 0.06 square millimeter copper
Max. voltage / current: 12V / 15A
Length of wire: 14.2inchs/36.2cm
Using: Improve driving safety
Material : Plastic, Copper
Color : Gray
Product size (L x W x H) : 4.7 x 1.9 x 0.75inches/ 12 x 4.8x 1.9cm
Package size (L x W x H) : 5.6x 2.2x 1.4inches / 13.5 x 5.6x 3.6cm
Packing list:
1 x 12~24V battery tester
1 x user manual