Feature:
Brand name: Elecdeer
Application: Household Tool Set
Repair Steps:
1. Use alcohol with cloth clean the dent place
2. Glue gun (with glue stick) Plug in the power supply , wait 3-5 minute
3. Choose the right black dent tabs ,and apply glue full in the tabs ( have different size dent tabs to choose ,more big dent need use more
big dent tabs)
4. Use black dent tabs fixed at dent place
5. Use the pdr pulling bridge Screw holes Align the black tabs, screw the cap onto the tabs and tighten it tight, tighten the screw cap until the
small pit is repaired
6. Repair ok later ,Twist off the nut , take out the pulling bridge , use the alcohol and rubber scraper clean the glue
1 X Pulling Bridge | 1 X Cleaning Cloth | 1 X Scraper |
12 X Bridge Type Chuck Gasket | 1 X Rubber Hammer | 1 X Tap Down Pen |
11 X 110V-220V Glue Gun | 6 X Yellow Glue Sticks | 1 X User Manual |