Description:
Waterproof.
Easy to install.
Wide viewing angle.
LED night vision function.
Low power consumption.
Applicable to variety of Vehicles:car,truck,RV,mini-van etc.
High resolution,high sensitivity and high signal to noise ratio.
High definition,can help avoid incidents and accidents abrasion effectively.
Shockproof,waterproof,anti-interference and resistance to high/low temperature.
Perfect solution to get rid of that poor rear view visibility on your car,boat,trailer,
camper,truck or any vehicle that no rear-view mirror or poor rear vision.
Specification:
Sensor:PC1030
Water-proof:IP67
Sync system:Internal
Lens angle:1.8mm/170°
Resolution(TV lines):420
Video output:1.0Vp-p,75Ohm
Scanning system:2:1 interlace
Power supply: DC 12V
Sensor area:4.08mm*3.12mm
Storage temperature:-40°C to 85°C(RH 95% Max)
Operating temperature:-20°C to 75°C(RH 95% Max)
Minimum illumination:0.1-0.5 Lux/F=1.2(0 Lux with IR on)
Note:
1.This product is a 12V voltage.
2.Removal of connector,terminal type,do not pull harness.
3.When installing the product,be sure to use the specified drill,screws,etc.
4.The camera should be professionally qualified technical staff,in suitable
the environment installation.
5.To avoid damage to the camera function,the use must be approached carefully,
do not have a strong impact or
improper repair and reconstruction.
Package Included:
1 X Car Reverse Camera
Waterproof.
Easy to install.
Wide viewing angle.
LED night vision function.
Low power consumption.
Applicable to variety of Vehicles:car,truck,RV,mini-van etc.
High resolution,high sensitivity and high signal to noise ratio.
High definition,can help avoid incidents and accidents abrasion effectively.
Shockproof,waterproof,anti-interference and resistance to high/low temperature.
Perfect solution to get rid of that poor rear view visibility on your car,boat,trailer,
camper,truck or any vehicle that no rear-view mirror or poor rear vision.
Specification:
Sensor:PC1030
Water-proof:IP67
Sync system:Internal
Lens angle:1.8mm/170°
Resolution(TV lines):420
Video output:1.0Vp-p,75Ohm
Scanning system:2:1 interlace
Power supply: DC 12V
Sensor area:4.08mm*3.12mm
Storage temperature:-40°C to 85°C(RH 95% Max)
Operating temperature:-20°C to 75°C(RH 95% Max)
Minimum illumination:0.1-0.5 Lux/F=1.2(0 Lux with IR on)
Note:
1.This product is a 12V voltage.
2.Removal of connector,terminal type,do not pull harness.
3.When installing the product,be sure to use the specified drill,screws,etc.
4.The camera should be professionally qualified technical staff,in suitable
the environment installation.
5.To avoid damage to the camera function,the use must be approached carefully,
do not have a strong impact or
improper repair and reconstruction.
Package Included:
1 X Car Reverse Camera
,,,,