PP2000 Lexia 3 Diagnostic OBD Interface Scan Tool For Peugeot for Citroen
$70.99
- Product Code: ED0007163
- Availability: In Stock
- Ex Tax: $70.99
PP2000 Lexia 3 Diagnostic Interface Scan Tool For Peugeot Citroen
Description:
Lexia 3 diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic.
Lexia 3 diagnostics software allows you to perform complete diagnostics from 1995 most present models.
Diagnostics Lexia 3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-Specific connector (only older cars, pre-2001).
Function:
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph,
9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Programming functions/Adaptation:
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units,
And some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements:
Software requires at least Intel Celoron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended)
And Microsoft Windows 98 SR2/2000/XP/WINDOWS 7 with the latest service pack installed.
NOTE: This product couldn't supports Windows 7 64 bit but 32 bit. Please pay attention to it.
PP2000 Software Languages:
English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian,
Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatian, Thai
Package Included:
,,,
Description:
Lexia 3 diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic.
Lexia 3 diagnostics software allows you to perform complete diagnostics from 1995 most present models.
Diagnostics Lexia 3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-Specific connector (only older cars, pre-2001).
Function:
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph,
9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Programming functions/Adaptation:
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units,
And some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements:
Software requires at least Intel Celoron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended)
And Microsoft Windows 98 SR2/2000/XP/WINDOWS 7 with the latest service pack installed.
NOTE: This product couldn't supports Windows 7 64 bit but 32 bit. Please pay attention to it.
PP2000 Software Languages:
English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian,
Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatian, Thai
Package Included:
| 1 X PP2000 Diagnostic Interface Scan Tool | 1 X 16pin to Clip Cable | 1 X Long 15pin to USB Cable |
| 1 X 30pin Adapter for Older Vehicle Types | 1 X OBD2 Cable | 1 X Short 15pin to USB Cable |
| 1 X CD Software (Download Here) |
,
,
,
