Why do you need an Elecdeer Side Mirror Heating module?
Why do you need an Elecdeer Side Mirror Heating module?
1. The heating function of the rear-view mirror means that when the car is driving in the rain, snow, fog, and other weather, the rear-view mirror ensures the clarity of the lens surface through electric heating embedded behind the lens. Car rear-view mirror heating is more suitable for rainy and snowy days. When the rear-view mirror is heated, the rear-mirror heater quickly heats the mirror surface, which can slowly remove rain or fog on the mirror surface, saving the driver the trouble of frequently manually wiping the mirror surface and reducing driving risks.
2. The car rear-view mirror heating function is available in every car. Check if your car is equipped. Before using the mirror heating, please make sure the vehicle is started, or turn the key to the ON position, then use the mirror heating after turning on the power. It is important to note that this feature should be used again when the vehicle battery is low or the battery has failed.
3. In rainy and snowy weather, press the rear-view mirror heating switch, the key indicator light will be on, and the electric heater will quickly heat up to a certain temperature within a few minutes. At Fahrenheit temperature, hot air will come out from the left and right rear-view mirrors (if the outdoor ambient temperature is relatively low), the water droplets on the surface of the rear-view mirror will become smaller and smaller due to heating and evaporation, and the fog will gradually disappear, thus To achieve the effect of heating the lens, defogging and defrosting.
4. Although the heating of the car rear-view mirror is practical, it has limitations on the model. For example, the mirror heating setting is the operating ambient temperature in degrees Celsius. In addition, the rear-view mirror heating function is also commonly used. Use more than one clock at a time, otherwise it will affect the life and clarity of the mirror. If convenient for the driver, the mirrors can be heated and wiped with a dry cloth.
5. Attachment: Other methods of defogging the rear-view mirror:
6. Add rain eyebrows:
7. It is a common practice to install rain eyebrows on the rearview mirror. This method is convenient, inexpensive, and effective, and is especially suitable for installation in cars that live in rainy areas. Side mirror eyebrows also have certain limitations. Because of the style, rain eyebrows are generally exterior and interior.
8. Water flooding agent:
9. Applying a waterproofing agent on the rear-view mirror can also keep the rear-view mirror clear. The composition of glass waterproofing agent on the market is silicone oil. By changing the tension of the water on the glass surface, there is water on the surface of the rear-view mirror. Although after using sodium silicate water, the small water droplets will form round water droplets, which can fall off the rear-view mirror with a little shaking or wind.